Power System
Power system is covering large electrical field from generation, distribution to transmission. A properly designed power system and its protection are vital in maintaining the stability of the system. Glopower follows a standard of procedures in solving our customers’ requirement.
High Fault Solutions
All equipment must comply with the short circuit ratings depending on their voltage levels. The distribution system shall have maximum short circuit fault levels not greater than 90% of the equipment short circuit current rating. Limiting the fault level can prevent severe accidents from happening, maintaining a safe workplace environment.
Are you experiencing High Fault?
- Installation of generation units at premises.
- Factories with many motor loads.
- Oversized transformer.
- Equipment is located close to the source.
- Power system problems (arcing & burning, system voltage drop)
- Installation of renewable system at premises.
How Glopower’s High Fault solution can help you?
With the bulk installation of new generation devices especially the renewable system, the fault level increases and exceeds the sustained limit. Comprehensive studies and solution provided by Glopower can reduce the fault current to a safe and appropriate level.
Lightning / Earthing Solutions
A lightning strike can be direct or indirect, causing fire damage and properties losses. Most of these losses could be minimised or eliminated by the proper design and installation of a structural lightning protection system.
Are you experiencing Lightning/Earthing problems?
- Frequent equipment damage and failure.
- Burning marks on equipment due to lightning.
How Glopower’s Lightning/Earthing solution can help you?
Glopower can provide services such as inspection of the existing Lightning and Earthing system of the structure. Solutions with ideal quality in both materials and installation practices are provided for utmost safety protection.
Electrical System Solutions
Electrical system problems can be easily aware when there are electrical system faults or equipment failures. Hidden electrical system problems can slowly degrade the equipment, shorten the service life and lower the performance. These problems may be due to poor electrical system design such as undersized cable, incorrect protection relays settings, significant voltage drop, etc.
Are you experiencing Electrical System problems?
- Overheating and burning of cables.
- Equipment failed to operate, damaged or tripped.
- Protection relay tripping delay or constantly tripping.
How Glopower’s electrical system solution can help you?
Glopower provides comprehensive electrical system study, from site inspection to solution implementation. A properly designed electrical system significantly reduces the risk of equipment damage, fire happening. The cost of equipment maintenance and replacement is greatly minimised.